THORNTAIL Offset Adaptive Mount, .830" ring, Fits Surefire E-Series, Viking Tactics VTAC-L4-BK, VTAC-MINI-L4, Black Anodize Finish, Designed To Extend The WeaponLight Beyond The Forend
In stock (1)
Price ​$63.09
UPC Code: 850962003638
Manufacturer Part #: LPIC830
THORNTAIL Adaptive Light Mount is specifically designed to extend the weapon light several inches beyond the end of the forend or rail system allowing the shooter to place the support hand farther forward on the weapon, improving the shooter's control, speed and accuracy while increasing usable space for attaching IR devices, lasers, grips, etc. 
THORNTAIL attaches to any 1913 Picatinny rail, is fully ambidextrous, providing 8 different mounting solutions on a single rail system. 
THORNTAIL’s cantilevered mounting design places the bezel of the weapon light above the barrel and in front of the front sight base, eliminating shadows in critical low or no light shoot or no shoot situations. 
Ultra-lightweight THORNTAIL Adaptive Light Mounts are CNC machined from BILLET 6061-T6, Black Anodize TYPE III to MIL-A-8625F and 100% Berry Amendment Compliant. 
Each THORNTAIL comes complete with the necessary instructions, tools and hardware required to attach your light to your weapon. No Gunsmithing required.
100% LIFETIME WARRANTY. PERIOD. Return for full refund.
Designed with Haley Strategic Partners and MAD BY AMERICANS at Impact Weapons Components in Colorado.
THORNTAIL Offset Adaptive Mount, MIL620, Black Finish, Thorntail MIL620 Offset Adaptive Light Mount. An offset mount for the M900 & M620 Series lights
In stock (1)
Price ​$45.06
UPC Code: 850962003621
Manufacturer Part #: LPICMIL620
Mini-CQB Weapon Light
*375 LUMENS from a single CR123A!
*Made in USA by Elzetta and Impact Weapon Components creating an industry 1st modular weapon light.
*Dedicated Modular Weaponlight with 375 lumen LED Module, Rotary Momentary & Twist-on Tailcap, Crenulated Bezel, fully potted electronics for extreme durability under heavy recoil, 6061-T6 Billet, Black Type III HC Anodize.
*Impact Weapons Components proven Offset Cantilevered Mount is integrated into the light body, eliminating the need for a separate mount and fastners to secure the light body to the light mount.
*Select your mount for either 1913 Picatinny or BOTH M-LOK® and Keymod by using IWC's KML Modular Mount.
*Pick your own tailcap from a variety of Elzetta tailcap interface options.
*Optimized beam pattern to produce a “wall of light” intended for room clearing and tactical response operations requiring rapid threat assessment / situational awareness.
*Puposely eningeered with soft edge and uniform beam pattern characteristics resulting in an elimination of tunnel vision effects.
*Optimized for close encounters, CQB and home defense.
*Compatible with all Elzetta Alpha lighting components allowing users an opportunity to create a mission specific weapon light.
*Fully ambidextrous mount provides multiple positioning options at an angled offset orientation.
*Each MINI-CQB comes complete with the necessary instructions, tools, and hardware required to attach your light to your rail system of choice.  
*Conversion kits for 1913 Picatinny or MLOK® / Keymod each sold separately.  
*No Gunsmithing required.

Mini-CQB Weapon Light, Picatinny, Momentary Switch, 375Lumen, Black Finish
In stock (0)
Price $197.19
UPC code:
MFG #A211A1 (1913 Picatinny)

Mini-CQB Weapon Light, KeyMod/M-LOK, Momentary Switch, 375 Lumen, Black Finish
In stock (0)
Price $220.67
UPC code:
MFG #A211A2 (KMOD/MLOK)

Mini-CQB Weapon Light, Picatinny Rail, Click Switch, 375 Lumen, Black Finish
In stock (0)
Price $201.89
UPC code:
MFG # A212A1

Mini-CQB Weapon Light, KeyMod/M-LOK, Click Switch, 375 Lumen, Black Finish
In stock (0)
Price $225.36
UPC code:
MFG #A212A2
Bipod Mount-V2 MOUNT-N-SLOT
*Accepts any bipod which attaches to a standard sling swivel stud
*Directly attaches to any slot on M-LOK Compliant Rails and ALL Magpul MOE Handguards including MOE AR15/M4/M16/SR25/M110 Original & M-LOK, MOE SL M-LOK, MOE AK/AKM M-LOK, MOE Remington 870 Original & M-LOK and MOE Mossberg 590/590A1 Original & M-LOK
*Designed with IWC's proprietary KML Reversible Mounting Nut, which engages the inside of the Original width slot or simply reverse the nut to the M-LOK compatible design and attach to M-LOK compliant slots
*No gunsmithing, spacers or washers are required for install
*Ergonomic, direct attach design eliminates all sharp edges which can ensnarl the operator’s gear
*Ultra-light MOUNT-N-SLOT design weighs only 6.775 grams (.239 ounces)
*CNC machined from billet 6061-T6 aluminum;Type III Anodized per MIL-A-8625F
*100% LIFETIME WARRANTY. PERIOD. Return for full refund including your shipping charges
*IWC’s MOUNT-N-SLOT products are MADE IN AMERICA
In stock (0)
Price $14.30
UPC Code: 850962003379
Manufacturer Part #: BBF0
KeyMod Bipod MOUNT-N-SLOT Stud directly attaches to KeyMod forends.
*Elegent, minimalistic design and keeps the rail simple and virtually unencumbered by adding only what's needed to attach a bipid requiring a single Sling Swivel Stud to attach to the firearm.
*Single-piece Sling Swivel Stud Bipod Mount design contains no threaded fasteners which can loosen and fail during use.
*Simple, No-Tool Installation.
*NOTE: Removal of handguard may be required.
*Unlike a traditional KeyMod Mount, IWC's Bipod Mount is placed through the round hole in the KeyMod pattern and is secured by placing an O-Ring around the shaft against a shoulder on one end, which provides tension against the inside of the handguard while a c-clip placed into a groove machined into the shaft is used to secure the Bipod Mount shaft against the outer surface of the hand guard.
*Single piece shaft stud design CNC Machined from billet 303 Stainless Steel.
*Plated with Black Melonite to prevent rust, corosion or wear during a lifetime of use.
*Weighs less than an ounce.
*Proudly Made in America by Impact Weapons Components, LLC.
*100% Money Back Guarantee
In stock (0)
Price $8.92
UPC Code: 850962003980
Manufacturer Part #: BBFKM
THORNTAIL KeyMod M3M61913 Offset Adaptive Light Mount is designed to directly attach SureFire's M300's, M600's Mini-Scout and any 1913 rail mounted weaponlights (INFORCE APL, WML's, Surefire X300's, X400's, Streamlight TLR's) to a KEYMOD Compatible Forend, eliminating the need for separate bulky 1913 rail sections and a separate light mount.
*IWC designed our new THORNTAIL M3M61913 Offset Adaptive Light Mount with AMBI mounting capability, so you can place the tail cap of the weaponlight light in up to 6 separate munting positions on a forend with 3 KeyMod attaching locations.
*Rugged, durable design CNC machined from a single piece of 6061-T6 Billet Aluminum.
*THORNTAIL can also be cantilevered past the front of the forend (based on forend design).
*Designed and manufactured by Americans working at IMPACT WEAPONS COMPONENTS for HALEY STRATEGIC PARTNERS.
In stock (0)
Price $44.85
UPC Code: 850962003812
Manufacturer Part #: LKEYM3M61913
THORNTAIL KeyMod MIL620 Offset Adaptive Light Mount is designed to directly attach SureFire's M620's Lights and the M952, M951, M961, M962 MILLENNIUM series lights to a KEYMOD Compatible forend, eliminating the need for bulky Rail Sections and the integral Surefire Light Mount.
​In stock (0)
Price $44.85
UPC Code: 850962003805
Manufacturer Part #: LKEYMIL620

THORNTAIL 1913 Offset Adaptive Light Mount was designed to expand the mounting locations and illumination capability of rail-mounted weaponlights.
*Ambidextrous and Cantilevered design provides 8 different mounting positions and 4 additional adjustments fore / aft on a quad rail system. This enables the Operator to position the rail mounted weaponlight up to several inches beyond the end of the forend or rail system allowing the shooter to place the support hand farther forward on the weapon, improving the shooter's control, speed and accuracy while increasing usable space for attaching IR devices, lasers, grips, etc.
*45 Degree Offset design places the bezel of the weaponlight to reduce barrel shadowing during critical low light situations.
*Can also be used as a 45 Offset mounting platform for BUIS.
*LESS THAN an OUNCE! Ultra-lightweight THORNTAIL Offset 1913 Adaptive Light MOUNT-N-SLOT weighs a mere .773 ounces (21.915G). Weighs a fraction of the weight of an extended length rail system!
*THORNTAIL attaches to any 1913 Picatinny rail.
*THORNTAIL is CNC machined from BILLET 6061-T6, Black Anodize TYPE III to MIL-A-8625F and 100% Berry Amendment Compliant.
*THORNTAIL comes complete with the necessary instructions, tools and hardware required to attach your light to your weapon. No Gunsmithing required.
*100% LIFETIME WARRANTY. PERIOD. Return for full refund.
*Designed with Haley Strategic Partners and MADE BY AMERICANS at Impact Weapons Components in Colorado!.
​In stock (0)
Price $44.85
UPC Code: 850962003768
Manufacturer Part #: LPIC1913